How to Fit a Silicone Sleeve on Your memobottle A5

Quick answer

Slide the sleeve onto the bottom of your memobottle A5, align the cutouts with the bottle's edges, and press it up until it snaps into place. The whole process takes less than a minute.

How to fit the sleeve in 4 steps

1. 1. Orient the sleeve: Hold the silicone sleeve so the open end faces upward and the interior cutout matches the shape of your A5 bottle. The sleeve has a distinct front and back – the wider opening should align with the bottle's wider side. Common mistake: Trying to force the sleeve on upside down. Check the cutout shape before you start.
2. 2. Start at the bottom: Place the bottom edge of your memobottle A5 into the open end of the sleeve. Press the bottle down gently so the sleeve begins to wrap around the base. The silicone should stretch evenly – do not pull or yank. Checkpoint: If the sleeve catches on a corner, ease it back and reposition rather than forcing it.
3. 3. Work the sleeve upward: Using both hands, slide the sleeve up the body of the bottle. Keep the sleeve centered as you go. When you reach the top, the sleeve should sit just below the bottle's neck, with all edges aligned. Common mistake: Rushing this step can cause the sleeve to twist. Stop and realign if you see bunching.
4. 4. Check the fit: Once the sleeve is fully on, run your fingers around the edges to ensure it is seated evenly. The sleeve should not slide around or leave gaps. If it feels loose, remove it and restart from step 1 – the silicone needs to be stretched evenly from the start. Final check: A correctly fitted sleeve stays put when you shake the bottle gently. If it moves, refit it.

Product facts

• A5 Silicone Sleeve - Midnight Blue: The A5 Midnight Blue Silicone Sleeve fits the A5 memobottle like a glove with a smooth matte finish and added thermal insulation. A precise fit ensures the sleeve stays in place during daily use and provides consistent insulation for your drink.